DRESDA TRITON






DRESDA TRITON








DRESDA TRITON CHROME  GAS TANK






Of all the bikes built under the parallel twin-cylinder format that dominated motorcycling in the 1960s, the Triton embodied the best of both worlds: the straight-line performance of Triumph's powerful engine, and the handling ability of the legendary Norton Featherbed chassis. Tritons were built by numerous firms and individuals, using a variety of engines and chassis from those two major manufacturers. The combination was so successful that the Triton came to be regarded as a marque in its own right.



The Triton's precise origins are unclear, partly because several enterprising individuals built similar hybrids in the mid-1950s. As early as 1954, London-based racer and engineer Doug Clark used the chassis of a blown-up Manx Norton single to house a 650cc Triumph engine. Clark rode the resultant twin on both road and racetrack. But after the bike had been noticed by a Triumph employee while at Silverstone circuit, Clarke received a letter from the factory threatening legal action if he continued with the project. He also claimed that Triumph told its London dealers to refuse to sell him engine parts.





DRESDA TRITON


Appealing concept



DRESDA TRITON WITH CUSTOM PAINT
The appeal of the Triton concept in the early 1960s was easy to understand. Triumph's twin had held a straight-line advantage ever since Norton's new Model 7 had been outpaced by the Speed Twin in 1949. Ten years later, Triumph's 650cc Tiger 110 was a good lOmph (16km/h) faster than its 600cc rival the Norton Dominator 99. By the time Norton's more powerful 650SS arrived in 1962, Triumph's reputation for speed was secure. But handling was a different matter. Norton's Featherbed frame and Roadholder forks were notably stronger than their Triumph equivalents, and also came with an impressive racing pedigree.



Those contrasting reputations helped to establish the Triton as the 'dream ticket' for road and track. The bikes varied in their details, featuring different fuel tanks, instruments, seats, suspension parts, and exhaust systems. As well as Triumph's popular twin-carburettor 650cc Bonneville engine, Triton builders used 500cc motors (and later the 750cc unit too). The Featherbed frame could be used in its original Wideline or later Slimline form, as well as being sourced from the Manx single.


Specialist firms including Dresda Triton Autos of west London began building complete Tritons and also conversion kits, some based around Featherbed replica frames of their own construction. The Triton received a boost in 1965 when Dresda boss Dave Degens, a top racer, rode one to victory in the 24- hour endurance event at Montjuic Park in Barcelona, with co-rider Rex Butcher. The winning machine was then ridden at high speed from London to Edinburgh and back by a journalist from The Motor Cycle, generating further interest.



Degens also won production races on Tritons, resulting in objections from riders of more standard machinery, but the controversy merely served to generate even more publicity for the hybrid machines. By the mid-1960s several firms were producing complete Tritons, and many others were offering engine plate kits plus parts including fuel tanks and seat units. Degens estimates that Dresda alone built more than 500 Tritons over the next few years, plus many replica frames.



A Triton was still a classy combination in 1969, when Motorcycle Mechanics tested a hotted-up Dresda special at !26mph (203km/h), but the boom was almost over. As well as the many high-quality hybrids, there had been more than a few Tritons built with limited expertise and a second-rate blend of Triumph and Norton components. But the legend of the Triton lived on, especially at Dresda, where Degens continued to build, sell and race Tritons into the 21st century.

5 comments:

  1. Dresda Dave Degens and Russell are still going strong in Sussex building and maintaining Dreda Tritons I’ve just acquired one of these iconic bikes and can’t stop smiling long live The Tritoncafe racer.

    ReplyDelete
  2. Is Doug Clarke the D G A Clarke who had a shop in the Southgate area of London? I and my friends bought many bits from him over the years.

    ReplyDelete
    Replies
    1. Yre, that is the same guy.
      I bought a Velocette Venom engine etc in a Featherbed frame from him in 1967.

      Delete
  3. Ich möchte Ihnen wirklich raten, zu versuchen, Ihre Aufmerksamkeit auf diese Seite https://mannapotheke.de/via.../ zu lenken , da hier bekomme ich immer alle Probleme mit den Genitalien zu lösen, versuchen Sie es und Sie, ich bin sicher, dass Sie zufrieden sein werden

    ReplyDelete
  4. This was my Uncle Doug - he was great pals with my Dad Richard Rainbow of Rainbow Motorcycles in Ware

    ReplyDelete